CBSE 10th Science Exam 2021: Check Quick Revision Notes for Chapter 3 (Based on Revised Syllabus)
CBSE Class 10 Science notes for Chapter 3 - Metals And Non-metals are available here for quick revision before the exam. All these notes are entirely based on the revised and reduced CBSE Class 10 Science Syllabus.
Check quick revision notes for CBSE Class 10 Science Chapter 3 - Metals And Non-metals here for the upcoming Board Exam 2021. These notes have been prepared entirely according to the revised syllabus of CBSE Class 10 Science. You may revise the whole chapter in a very short time. You may also attempt the questions given at the end of the notes for a quick self-assessment.
Revision Notes for CBSE Class 10 Science Notes for Chapter 3 Metals And Non-metals:
Physical Properties of Metals
(i) They are lustrous, i.e., they have a shiny surface.
(ii) All metals are solids except mercury which is liquid at room temperature.
(iii) Metals are ductile which means they can be drawn into wires.
(iv) Metals are malleable which means they can be beaten into sheets. The only exception is mercury.
(v) They are good conductors of heat and electricity except lead and mercury.
(vi) They have high density and high melting point except alkali metals like lithium, sodium, potassium are so soft that they can be cut with a knife.
Physical Properties of Non-metals
(i) They are non-lustrous and have dull appearance except graphite and iodine that are lustrous.
(ii) They are generally soft, except diamond.
(iii) They are non-ductile.
(iv) They are non-malleable.
(v) They are poor conductors of heat and electricity except graphite which is a good conductor of electricity
(vi) They have low density and low melting point except diamond which has high melting point.
Chemical properties of metals:
(i) Metals react with air or oxygen to form metal oxide.
2Cu + O2 → 2CuO
4Al + 3O2 → 2Al2O3
Metals such as potassium and sodium react so vigorously that they catch fire if kept in the open. Hence, to protect them and to prevent accidental fires, they are kept immersed in kerosene oil.
Amphoteric oxides: Some metal such as aluminium oxide, zinc oxide can react with both acids and bases to produce salt and water. Such oxides are known as amphoteric oxides.
Al2O3 + 6HCl → 2AlCl3 + H2O
Al2O3 + 2NaOH → 2NaAlO2 + H2O
(ii) Most metal oxides are insoluble in water but some of these dissolve in water to form alkalis (metal hydroxides).
2Na + 2H2O → 2NaOH + 1H2
2Al + 3H2O → Al2O3 + 3H2
# Metals like potassium and sodium react violently with cold water. The reaction is so violent and exothermic that the evolved hydrogen immediately catches fire.
2K + 2H2O → 2KOH + H2(g) + heat energy
2Na + 2H2O → 2NaOH + H2(g) + heat energy
# The reaction of calcium with water is less violent. Calcium starts floating because the bubbles of hydrogen gas formed stick to the surface of the metal.
Ca + 2H2O → Ca(OH)2 + H2(g)
# Magnesium does not react with cold water. It reacts with hot water to form magnesium hydroxide and hydrogen. It also starts floating due to the bubbles of hydrogen gas sticking to its surface.
# Metals like aluminium, iron and zinc do not react either with cold or hot water. But they react with steam to form the metal oxide and hydrogen.
2Al + 3H2O → Al2O3 + 3H2(g)
3Fe + 4H2O → Fe3O4 + 4H2(g)
(iii) Metals react with dilute acids to form salt and hydrogen.
Mg + 2HCl → MgCl2 + H2
Reaction of metals with solutions of other metal salts
Reactive metals can displace less reactive metals from their compounds in solution or molten form.
Fe + CuSO4 → FeSO4 + Cu
Cu + 2AgNO3 → Cu(NO3) + 2Ag
○ Metals such as potassium and sodium react so vigorously that they catch fire if kept in the open. Hence, to protect them and to prevent accidental fires, they are kept immersed in kerosene oil.
○ At ordinary temperature, the surfaces of metals such as magnesium, aluminium, zinc, lead, etc., are covered with a thin layer of oxide. The protective oxide layer prevents the metal from further oxidation.
○ Iron does not burn on heating but iron filings burn vigorously when sprinkled in the flame of the burner.
○ Copper does not burn, but the hot metal is coated with a black coloured layer of copper(II) oxide.
○ Silver and gold do not react with oxygen even at high temperatures.
Chemical Properties of Non-metals
(i) Non-metals reacts with oxygen to form non-metal oxide.
S + O2 → SO2
C + O2 → CO2
(ii) Non-metals do not react with water and acids.
The reactivity series is a list of metals arranged in the order of their decreasing activities.
Formation of ionic compounds:
Compounds formed due to the transfer of electrons from a metal to a non-metal are known as Ionic Compounds. Here, metals get positive charge on losing electrons and non-metals get negative charge on gaining electrons. The bond formed between such positive and negative ions is called Ionic Bond.
Sodium and chlorine react with each other to form sodium chloride.
Properties of ionic compounds:
(i) Ionic compounds are solids and are hard because of the strong force of attraction between the positive and negative ions.
(ii) These compounds are generally brittle.
(iii) Ionic compounds have high melting and boiling points. (because a large amount of energy is required to break the strong ionic bonds).
(iv) They are generally soluble in water and insoluble in solvents such as kerosene, petrol, etc.
(v) They conduct electricity in molten and solution state. (They do not conduct electricity in solid state because movement of ions in the solid is not possible due to their rigid structure)
Topics deleted from the chapter are:
- Basic metallurgical processes
- Corrosion and its prevention.
Questions for self-assessment:
Q. Give an example of a metal which
(a) is the best conductor of heat.
(b) is a poor conductor of heat.
Q. What is thermite reaction? What is its application?
Q. A solution of copper sulphate was kept in an iron pot. After a few days, the iron pot was found to have a number of holes in it. Explain the reaction and write the chemical equation for the same.
Q. NaCl does not conduct electricity in solid state whereas it does conduct electricity in solution as well as in molten state. Why?
Q. An element forms an oxide A2O3 which is acidic in nature. Identify A as a metal or non-metal.