Top 50 MCQs for CBSE Class 12 Chemistry Pre-Board Exam 2027: Important Questions with Answers

Practice 50 important MCQs for CBSE Class 12 Chemistry Pre-Board Exam 2027 with answers. Revise all 10 chapters, including Solutions, Electrochemistry, Organic Chemistry and Biomolecules.

Nov 17, 2026, 17:33 IST

CBSE Class 12 Chemistry Pre-Board Exam 2027 is an important opportunity for students to revise key concepts, practise objective-type questions and assess their preparation before the board examination. Multiple-choice questions (MCQs) test conceptual understanding, factual knowledge and the ability to apply chemical principles to numerical and reaction-based problems.

The following 50 practice MCQs cover major topics from the Class 12 Chemistry syllabus, including Solutions, Electrochemistry, Chemical Kinetics, d- and f-Block Elements, Coordination Compounds, Haloalkanes and Haloarenes, Alcohols, Phenols and Ethers, Aldehydes, Ketones and Carboxylic Acids, and Amines. Each question is followed by its correct answer for quick revision.

Also Check: CBSE Class 12 Syllabus 2026-27

CBSE Class 12 Chemistry Pre-Board Exam 2027: Important Details

Particulars
Details
Board
Central Board of Secondary Education (CBSE)
Class
12
Subject
Chemistry
Subject Code
043
Academic Session
2026-27
Theory Exam
70 marks
Practical Exam
30 marks
Exam Duration
3 hours
Official Sample Paper
Available

Top 50 MCQs for CBSE Class 12 Chemistry Pre-Board Exam 2027

Chapter 1: Solutions

Q1. Which of the following is a colligative property?

A. Viscosity
B. Surface tension
C. Elevation in boiling point
D. Refractive index

Answer: C. Elevation in boiling point

Q2. Two solutions having the same osmotic pressure at a given temperature are called:

A. Hypertonic
B. Hypotonic
C. Isotonic
D. Saturated

Answer: C. Isotonic

Q3. The van't Hoff factor for a solute undergoing dissociation is generally:

A. Less than 1
B. Equal to 0
C. Equal to 1
D. Greater than 1

Answer: D. Greater than 1

Q4. According to Raoult's law, the partial vapour pressure of a component in an ideal solution is proportional to its:

A. Mole fraction
B. Molar mass
C. Density
D. Boiling point

Answer: A. Mole fraction

Q5. What is the molality of a solution containing 0.1 mole of solute dissolved in 500 g of solvent?

A. 0.1 mol kg⁻¹
B. 0.2 mol kg⁻¹
C. 0.5 mol kg⁻¹
D. 2 mol kg⁻¹

Answer: B. 0.2 mol kg⁻¹

Related Stories

Chapter 2: Electrochemistry

Q6. The standard cell potential of a galvanic cell is calculated using:

A. E°anode - E°cathode
B. E°cathode - E°anode
C. E°anode + E°cathode
D. E°anode × E°cathode

Answer: B. E°cathode - E°anode

Q7. The relationship between Gibbs energy change and standard cell potential is:

A. ΔG° = nFE°cell
B. ΔG° = −nFE°cell
C. ΔG° = F/E°cell
D. ΔG° = -E°cell/nF

Answer: B. ΔG° = -nFE°cell

Q8. The SI-derived unit commonly used for molar conductivity is:

A. S cm⁻¹
B. S cm² mol⁻¹
C. ohm cm
D. mol L⁻¹

Answer: B. S cm² mol⁻¹

Q9. What is the main function of a salt bridge in an electrochemical cell?

A. To increase the temperature
B. To maintain electrical neutrality
C. To stop electron flow
D. To increase electrode mass

Answer: B. To maintain electrical neutrality

Q10. Faraday's first law of electrolysis states that the amount of substance deposited is proportional to:

A. Resistance
B. Temperature
C. Electric charge passed
D. Electrode surface area

Answer: C. Electric charge passed

Chapter 3: Chemical Kinetics

Q11. What is the unit of the rate constant for a first-order reaction?

A. mol L⁻¹ s⁻¹
B. L mol⁻¹ s⁻¹
C. s⁻¹
D. mol² L⁻² s⁻¹

Answer: C. s⁻¹

Q12. The half-life of a first-order reaction is:

A. Directly proportional to initial concentration
B. Independent of initial concentration
C. Inversely proportional to temperature
D. Always zero

Answer: B. Independent of initial concentration

Q13. If the rate law is Rate = k[A], what happens to the reaction rate when the concentration of A is doubled?

A. It becomes half
B. It remains unchanged
C. It becomes double
D. It becomes four times

Answer: C. It becomes double

Q14. The minimum energy required for a chemical reaction to occur is known as:

A. Bond energy
B. Activation energy
C. Ionisation energy
D. Lattice energy

Answer: B. Activation energy

Q15. According to the Arrhenius equation, the rate constant generally increases with an increase in:

A. Temperature
B. Activation energy
C. Reaction volume
D. Molecular mass

Answer: A. Temperature

Also Check: CBSE Class 12 Sample Paper: Chemistry

Chapter 4: d- and f-Block Elements

Q16. Which of the following is not considered a transition element?

A. Iron
B. Copper
C. Zinc
D. Chromium

Answer: C. Zinc

Q17. Which compound is responsible for the purple colour of a commonly used oxidising agent in chemistry?

A. KMnO₄
B. K₂Cr₂O₇
C. MnO₂
D. FeSO₄

Answer: A. KMnO₄

Q18. The gradual decrease in the atomic and ionic radii of lanthanoids with increasing atomic number is called:

A. Inert pair effect
B. Lanthanoid contraction
C. Shielding effect
D. Diagonal relationship

Answer: B. Lanthanoid contraction

Q19. Transition elements commonly exhibit variable oxidation states because of:

A. Similar energies of ns and (n−1)d orbitals
B. Absence of d-electrons
C. Completely filled p-orbitals
D. High electronegativity only

Answer: A. Similar energies of ns and (n−1)d orbitals

Q20. Which statement about actinoids is correct?

A. All are non-radioactive
B. All are radioactive
C. They have no variable oxidation states
D. They belong to the p-block

Answer: B. All are radioactive

Chapter 5: Coordination Compounds

Q21. The coordination number of cobalt in [Co(NH₃)₆]³⁺ is:

A. 3
B. 4
C. 6
D. 8

Answer: C. 6

Q22. What is the geometry of the complex [Ni(CO)₄]?

A. Square planar
B. Tetrahedral
C. Octahedral
D. Linear

Answer: B. Tetrahedral

Q23. Which of the following is a hexadentate ligand?

A. NH₃
B. H₂O
C. EDTA⁴⁻
D. Cl⁻

Answer: C. EDTA⁴⁻

Q24. What is the correct IUPAC name of [Co(NH₃)₆]Cl₃?

A. Hexaamminecobalt(III) chloride
B. Hexaamminecobalt(II) chloride
C. Cobalt hexamine chloride
D. Hexachlorocobalt(III) ammine

Answer: A. Hexaamminecobalt(III) chloride

Q25. Which type of isomerism is shown by cis- and trans-[Pt(NH₃)₂Cl₂]?

A. Linkage isomerism
B. Ionisation isomerism
C. Geometrical isomerism
D. Optical isomerism

Answer: C. Geometrical isomerism

Chapter 6: Haloalkanes and Haloarenes

Q26. Which type of alkyl halide generally undergoes an SN1 reaction most readily?

A. Methyl halide
B. Primary alkyl halide
C. Secondary alkyl halide
D. Tertiary alkyl halide

Answer: D. Tertiary alkyl halide

Q27. Chlorobenzene is less reactive towards nucleophilic substitution than chloroethane mainly because:

A. The C-Cl bond has partial double-bond character
B. Chlorine is absent from the benzene ring
C. The benzene ring is saturated
D. Chlorobenzene is ionic

Answer: A. The C-Cl bond has partial double-bond character

Q28. Which reagent is commonly used in the Finkelstein reaction?

A. NaI in acetone
B. NaOH in water
C. H₂SO₄
D. KMnO₄

Answer: A. NaI in acetone

Q29. The Wurtz reaction involves the reaction of alkyl halides with:

A. Sodium metal in dry ether
B. Zinc in water
C. Hydrogen in the presence of nickel
D. Alcoholic KOH

Answer: A. Sodium metal in dry ether

Q30. The carbon-halogen bond in haloalkanes is:

A. Non-polar
B. Polar
C. Metallic
D. Ionic in every case

Answer: B. Polar

Chapter 7: Alcohols, Phenols and Ethers

Q31. Which of the following is more acidic?

A. Ethanol
B. Phenol
C. Diethyl ether
D. Methanol

Answer: B. Phenol

Q32. Which class of alcohol produces immediate turbidity in the Lucas test at room temperature?

A. Primary alcohols
B. Secondary alcohols
C. Tertiary alcohols
D. All alcohols at the same rate

Answer: C. Tertiary alcohols

Q33. The Williamson synthesis is commonly used for the preparation of:

A. Aldehydes
B. Ethers
C. Ketones
D. Carboxylic acids

Answer: B. Ethers

Q34. Ethanol undergoes dehydration to form ethene when heated with concentrated H₂SO₄ at approximately:

A. 273 K
B. 323 K
C. 373 K
D. 443 K

Answer: D. 443 K

Q35. Phenol reacts with bromine water to form:

A. Bromobenzene
B. 2,4,6-tribromophenol
C. Benzaldehyde
D. Benzoic acid

Answer: B. 2,4,6-tribromophenol

Chapter 8: Aldehydes, Ketones and Carboxylic Acids

Q36. Which of the following gives a silver mirror with Tollens' reagent?

A. Ethanal
B. Propanone
C. Acetone
D. Diethyl ether

Answer: A. Ethanal

Q37. Which functional group is present in ketones?

A. -CHO
B. -COOH
C. >C=O
D. -OH

Answer: C. >C=O

Q38. Aldol condensation is generally shown by aldehydes and ketones containing:

A. No alpha hydrogen
B. At least one alpha hydrogen
C. A halogen atom
D. A carboxyl group

Answer: B. At least one alpha hydrogen

Q39. Which of the following undergoes the Cannizzaro reaction?

A. Ethanal
B. Propanal
C. Benzaldehyde
D. Propanone

Answer: C. Benzaldehyde

Q40. Carboxylic acids are acidic because they form:

A. Unstable carbocations
B. Resonance-stabilised carboxylate ions
C. Free radicals
D. Neutral molecules only

Answer: B. Resonance-stabilised carboxylate ions

Chapter 9: Amines

Q41. Aniline is less basic than ammonia because:

A. The nitrogen lone pair is delocalised into the benzene ring
B. Aniline has no nitrogen atom
C. Ammonia is aromatic
D. Aniline is a strong acid

Answer: A. The nitrogen lone pair is delocalised into the benzene ring

Q42. The carbylamine test is given by:

A. Primary amines
B. Secondary amines
C. Tertiary amines
D. All amines

Answer: A. Primary amines

Q43. Diazotisation of aniline is generally carried out at:

A. 273-278 K
B. 300-310 K
C. 350-360 K
D. 400 K

Answer: A. 273-278 K

Q44. Which reagent is used in the Hinsberg test to distinguish primary, secondary and tertiary amines?

A. Benzenesulphonyl chloride
B. Acetyl chloride
C. Sodium chloride
D. Bromine water

Answer: A. Benzenesulphonyl chloride

Q45. Gabriel phthalimide synthesis is mainly used to prepare:

A. Primary aliphatic amines
B. Secondary amines
C. Tertiary amines
D. Aromatic primary amines

Answer: A. Primary aliphatic amines

Chapter 10: Biomolecules

Q46. Glucose is classified as:

A. Ketohexose
B. Aldohexose
C. Aldopentose
D. Ketopentose

Answer: B. Aldohexose

Q47. The peptide linkage in proteins is:

A. -CO-NH-
B. -CO-O-
C. -CH₂-
D. -O-

Answer: A. -CO-NH-

Q48. Which sugar is present in DNA?

A. Ribose
B. Fructose
C. Deoxyribose
D. Glucose

Answer: C. Deoxyribose

Q49. Which of the following is a non-reducing sugar?

A. Glucose
B. Maltose
C. Lactose
D. Sucrose

Answer: D. Sucrose

Q50. The process in which a protein loses its biological activity due to changes in its natural structure is called:

A. Hydrolysis
B. Denaturation
C. Polymerisation
D. Fermentation

Answer: B. Denaturation

Also Check: CBSE Class 12 Chemistry Exam Pattern 2027

Preparation Tips for CBSE Class 12 Chemistry Pre-Board Exam 2027

Students should revise all 10 units prescribed in the CBSE Chemistry syllabus and practise questions from the official sample paper. The following preparation tips can help improve accuracy and time management:

  1. Revise important formulas: Memorise formulas related to molarity, molality, colligative properties, electrochemical cells and chemical kinetics.
  2. Practice numerical questions: Focus on Solutions, Electrochemistry and Chemical Kinetics, as these chapters involve formula-based calculations.
  3. Understand organic reactions: Revise named reactions, reagents, conversions and reaction mechanisms from the prescribed syllabus.
  4. Learn coordination compound nomenclature: Practise identifying ligands, oxidation states, coordination numbers and isomerism.
  5. Revise NCERT thoroughly: Read definitions, examples, reactions, tables and in-text questions from the prescribed textbook.
  6. Attempt sample papers: Solve the official CBSE Chemistry sample paper within the allotted time and check your answers using the marking scheme.
Apeksha Agarwal

Executive - Editorial

Get here latest School, CBSE and Govt Jobs notification and articles in English and Hindi for Sarkari Naukari, Sarkari Result and Exam Preparation. Empower your learning journey with Jagran Josh App - Your trusted guide for exams, career, and knowledge! Download Now