Jagran Josh Logo
  1. Home
  2. |  
  3. CBSE Board|  

NCERT Exemplar Solution for CBSE Class 10 Science Chapter 3: Metals and Non-Metals (Part-II)

May 12, 2017 10:31 IST

    NCERT Exemplar Problems and Solutions, Class 10 Science NCERT, Metals and Non Metals NCERT Exemplar ProblemsHere you get the CBSE Class 10 Science chapter 3, Metals and Non-Metals: NCERT Exemplar Solution (Part-II). This part of the chapter includes solutions for Question No. 37 to 58 from the NCERT Exemplar Problems for Class 10 Science Chapter: Metals and Non–Metals. These questions include only the Short Answer Type Questions framed from various important topics of the chapter.

    NCERT Exemplar Solution for CBSE Class 10 Science Chapter 3: Metals and Non-Metals (Part-I)

    NCERT Exemplar problems are a very good resource for preparing the critical questions like Higher Order Thinking Skill (HOTS) questions. All these questions are very important to prepare for CBSE Class 10 Science Board Examination 2017-2018 as well as other competitive exams.

    Find below the NCERT Exemplar problems and their solutions for Class 10 Science Chapter, Metals and Non-Metals:

    Short Answer Type Questions

    Question. 37 Iqbal treated a lustrous, divalent element M with sodium hydroxide. He observed the formation of bubbles in reaction mixture. He made the same observations when this element was treated with hydrochloric acid. Suggest how can be identify the produced gas. Write chemical equations for both the reactions.

    Answer.

    The divalent element must be some metal which releases hydrogen gas with both acid and bases. Bring a burning splinter near the gas, it will burn with a pop sound, hence it must be hydrogen gas. The divalent element could be zinc. Chemical equations for both the reactions are;

    recations of zinc with HCl, reaction of Zinc with NaOH

    Question. 38 During extraction of metals, electrolytic refining is used to obtain pure metals.

    (a) Which material will be used as anode and cathode for refining of silver metal by this process?

    (b) Suggest a suitable electrolyte also.

    (c) In this electrolytic cell, where do we get pure silver after passing electric current?

    Answer.

    (a) Thin strip of pure silver is made the cathode and impure silver block is made the anode.

    (b) Any salt solution of silver like AgNO3 can be used as electrolyte.

    (c) On passing electric current, from the electrolyte metal ions discharge on the cathode whereas metal ions from impure metal dissolves and goes into the electrolyte solution.

    CBSE Class 10 Science Syllabus 2017-2018

    Question. 39 Why should the metal sulphides and carbonates be converted to metal oxides in the process of extraction of metal from them?

    Answer.

    Usually metal sulphides and carbonates are converted to metal oxides in the process of extraction of metal. This is because metal oxides can easily reduce to metal with the help of some common reducing agent like coke.

    Ores of metal can converted to metal oxides with the help of calcination or roasting which depends on the nature of ore. For example, metal carbonate can convert to metal oxide by calcinations whereas roasting is used for metal sulphide.

    Question. 40 Generally when metals are treated with mineral, acids. Hydrogen gas is liberated but when metals (except Mn and Mg) are treated with HNO3, hydrogen is not liberated, why?

    Answer.

    Unlike other acids, reaction of nitric acid is little different because it is a good oxidizing agent.

    As hydrogen gas is formed during the reaction of nitric acid with metals, acid reacts with hydrogen gas and converts it to water. And nitric acid gets reduced to NO2 or NO or N2O.

    Question. 41 Compound X and aluminium are used to join railway tracks.

    (a) Identify the compound X.

     (b) Name the reaction.

    (c) Write down its reaction.

    Answer.

    (a) Iron (III) oxide (Fe2O3) is used with aluminium (Al) to join railway tracks.

    (b) The reaction is known as Thermite reaction or Alumino thermy process.

    (c)  Fe2O3(s) + 2 Al(s) → 2 Fe (l)  + Al2O3 (s) + Heat

    Question. 42 When a metal X is treated with cold water, it gives a basic salt Y with molecular formula XOH (molecular mass = 40) and liberates a gas Z which easily catches fire. Identify X, Y and Z and also write the reaction involved.

    Answer.

    Given, molecular formula of Y = XOH

    And molecular mass OF Y = 40.

    So, atomic mass of metal X would be;

     M + 16 + 1 = 40 ⟹ M = 40 − 17=23

    Metal with atomic mass 23 is sodium and reaction of it with cold water will form sodium hydroxide (NaOH).

    2Na  +  2H2O (Cold)  →  2NaOH   +   H2

    Hence; X = Sodium (Na), Y = Sodium hydroxide (NaOH), Z = Hydrogen gas (H2)

    Question. 43 A non-metal X exists in two different forms Y and Z. Y is hardest natural substance, whereas Z is a good conductor of electricity. Identify X, Y and Z.

    Answer.

    Different forms of any element are called as allotropes. Since Y is the hardest substance so it must be diamond which is an allotrope of carbon. Hence non-metal X is carbon. Another allotrope of carbon is graphite which is very good conductor of electricity due to presence of free mobile electrons.

    Hence; X = Carbon, Y= Diamond and Z = Graphite

    Question. 44 The following reaction takes place when aluminium powder is heated with MnO2

    3MnO2 (s) + 4Al (s)  3Mn (l) + 2Al2O3 (l) + Heat

    (a) Is aluminium getting reduced?

    (b) Is MnO2 getting oxidized?

    Answer.

    (a)    As Al converts to Al2O3, i.e., oxygen is added to Al so it is getting oxidized.

    (b)   Now MnO2 gets converted to Mn, i.e. oxygen is being removed from MnO2, so it is getting reduced.

    Question. 45 What are the constituents of solder alloy? Which property of solder makes it suitable for welding electrical wires?

    Answer.

    Solder is a fusible metal alloy of lead (Pb) and tin (Sn). It contains 40% lead and 60% of Sn metal.

    Solder has a low melting point around 90°C to 450 °C as compared to the metals used in forming electrical wires. So, it acts as bridge between two metal pieces, hence used for welding electrical wires.

    Question. 46 Metal A which is used in thermite process, when heated with oxygen gives an oxide B, which is amphoteric in nature. Identify A and B. Write down the reactions of oxide B with HCl and NaOH.

    Ans. Aluminium (Al) is used in thermite process so metal A is Aluminium. The reaction of Al with oxygen forms aluminium oxide Al2O3 which is amphoteric in nature as it can exhibit acidic as well as basic nature.

    4Al (s) +   3O2 (g) → 2Al2O3 (s)

    Hence; A = Aluminium and B = Aluminium oxide

    Reactions of aluminium oxide with HCl and NaOH are as given below;

    Al2O3 (s)   + 6 HCl (aq) → 2AlCl3 (aq)   + 3 H2O (l)

    Al2O3 (s)   + 2NaOH (aq) → 2NaAlO2 (aq)   + H2O (l)

    Question. 47 A metal that exists as a liquid at room temperature is obtained by heating its sulphide in the presence of air. Identify the metal and its ore. Give the reactions involved.

    Answer.

    Mercury is the only metal which exists in liquid state at room temperature. It is usually extracted from its sulphide ore, mercury (II) sulphide or cinnabar (HgS) by the process of roasting. Hence;

    Metal = Mercury and Ore = Cinnabar

    Roasting of ore occurs in the presence of air and form metal oxide which further reduce to metal.   

     extraction of mercury by roasting process 

    Question. 48 Give the formulae of the stable binary compounds that would be formed by the combination of following pairs of elements.

    (a) Mg and N2

    (b) Li and O2

    (c) Al and Cl2

    (d) K and O2

    Answer.

    (a) Mg and N2 - Mg3N2 (Magnesium nitride)

    (b) Li and O2- Li2O      (Lithium oxide)

    (c) Al and Cl2- AlCI3   (Aluminium chloride)

    (d) K and O2- K2O      (Potassium oxide)

    Question. 49 What happens when

    (a) ZnCO3 is heated in the absence of oxygen?

    (b) A mixture of Cu2O and Cu2S is heated?

    Answer.

    (a) Heating of carbonate ores in the absence of oxygen is called as calcinations. Zinc carbonate (ZnCO3) also forms zinc oxide (ZnO) and carbon dioxide when it is heated in the absence of oxygen.

    Calcination of ZnCO3

    This process is used to convert carbonate ores to metal oxides and also helps to remove moisture and volatile impurities.

    (b) Reaction of copper sulphide (Cu2S) and copper oxide (Cu2O)at high temperature forms copper metal and sulphur dioxide gas is expelled out.

    reduction of copper oxide

    Question. 50 A non-metal A is an important constituent of our food and forms two oxides B and C. Oxide B is toxic whereas C causes global warming.

    (a) Identify A, B and C.

    (b) To which group of periodic table does A belong?

    Answer.

    (a)    Non-metal A must be carbon as it forms two oxides; carbon monoxide (CO) and carbon dioxide. Out of these two oxides; one is toxic that is CO and another is responsible for global warming so it must be CO2 (carbon dioxide).

    Hence; A = Carbon, B = Carbon monoxide and C = Carbon dioxide.

    (b)   The electronic configuration of carbon is 2, 4. So there are 4 valence electrons and group number should be 10 + number of valence electrons. So carbon belongs to 14th group of the periodic table.

    Question. 51 Give two examples each of the metals that are good conductors and comparatively poor conductors of heat respectively.

    Answer.

    (a) Good conductors: Aluminium and copper are good conductors of heat.

    (b) Poor conductors: Titanium and mercury are poor thermal conductors.

    Question. 52 Name one metal and one non-metal that exist in liquid state at room temperature. Also name two metals having melting point less than 310 K (37°C).

    Answer.

    (a) Metal that exists in liquid state at room temperature = Mercury

    (b) Non-metal that exists in liquid state at room temperature = Bromine

    (c) Metals having melting point less than 310 K = Caesium (28.5oC) and Gallium (29.76°C)

    Question. 53 An element A reacts with water to form a compound B which is used in white washing. The compound B on heating forms an oxide C which on treatment with water gives back B. Identify A, B and C and give the reactions involved.

    Answer.

    The compound that is used in white wash is calcium hydroxide. So the element must be calcium that reacts with water to form calcium hydroxide. Heating of calcium hydroxide forms calcium oxide which again converts to hydroxide with the reaction of water.

    Hence; A = Ca, B = Ca(OH)2, C = CaO

    Reactions involved are:

     chemical reaction involving calcium

    Question. 54 An alkali metal A gives a compound B (molecular mass = 40) on reacting with water. The compound B gives a soluble compound C on treatment with aluminium oxide. Identify A, B and C and give the reactions involved.

    Answer.

    Alkali metals form MOH type of metal hydroxides with water. The molecular mass of hydroxide, B is 40 therefore mass of metal can be calculated as;

    MOH =   x  +   16  +  1 =  40 ⟹ x = 23

    Thus the atomic mass of alkali metal is 23. So it must be sodium that reacts with water to form sodium hydroxide (NaOH).

    2Na  +  2H2O  →  2NaOH (aq)  +   H2 (g)↑

    Reaction of sodium hydroxide with aluminium oxide (Al2O3) gives soluble sodium aluminate (NaAlO2).

    Al2O3  +   2NaOH    →  2NaAlO2   +   H2O

    Hence; A = Sodium, B = Sodium hydroxide and C = Sodium aluminate

    Question. 55 Give the reaction involved during extraction of zinc from its ore by

    (a) Roasting of zinc ore

    (b) Calcination of zinc ore

    Answer.

    (a) Roasting of zinc ore:

    • Conversion of sulphide ore to metal oxide can be done with the help of roasting which is a heating process in the presence of air below melting point of metal. Roasting of zinc ore like zinc sulphide forms zinc oxide and sulphur dioxide.
    • This metal oxide formed above can further reduce to metallic zinc in the presence of coke.

    roasting of zinc sulphide ore

    (b) Calcination of zinc ore:

    • Calcination is a heating process for carbonate ore in the absence of air. Zinc carbonate (ZnCO3) or calamine converts to zinc oxide and carbon dioxide.
    • Then, like roasting, ZnO again reduces to metallic zinc in the presence of coke at high temperature.

    calcination of zinc carbonate  

    Question. 56 A metal M does not liberate hydrogen from acids but reacts with oxygen to give a black colour product. Identify M and black coloured product and also explain the reaction of M with oxygen.

    Answer.

    Because of less reactivity, copper metal does not release hydrogen gas with acid.

    Cu(s)  +  HCl  →  No reaction

    Hence metal M is copper.

    Reaction of copper with oxygen on prolonged heating to form a black substance copper (II) oxide (CuO).

    2Cu(s)  +  O2 (g) → 2CuO(s)

    Question. 57 An element forms an oxide A2O3 which is acidic in nature. Identify A as a metal or non-metal.

    Answer.

    Metals usually form basic oxides like BaO, MgO, Na­2O etc. Unlike metals, non-metals tend to form acidic oxides.

    As we move from left to right in the periodic table, the acidity of oxides increases. So the element which forms acidic oxide must be non-metallic element.

    The formula for oxide is A2O3 means the charge on element must be +3 or element should have 3 valence electrons that is boron and formula for oxide would be B2O3.

    Question. 58 A solution of CuSO4 was kept in an iron pot. After few days the iron pot was found to have a number of holes in it. Explain the reason in terms of reactivity. Write the equation of the reaction involved.

    Answer.

    In reactivity series, iron is placed above copper. So we can say that iron is more reactive compare to copper and it can displace copper from its compounds.

    When copper sulphate solution is placed in an iron pot, iron reacts with copper sulphate and form iron sulphate with copper.

    So the blue colour of copper sulphate solution fade to light green due to formation of iron sulphate and holes are produced at places where iron metal has reacted.

    Fe(s)  +  CuSO4(aq) → FeSO4(aq)  +  Cu(s)

    You may also like to read:

    CBSE Class 10 NCERT Textbooks & NCERT Solutions

    NCERT Solutions for CBSE Class 10 Maths

    NCERT Exemplar Solution for CBSE Class 10 Science, Chemical Reactions and Equations

    NCERT Exemplar Solution for CBSE Class 10 Science Chapter 2: Acids, Bases and Salts

     

    DISCLAIMER: JPL and its affiliates shall have no liability for any views, thoughts and comments expressed on this article.

    Latest Videos

    Register to get FREE updates

      All Fields Mandatory
    • (Ex:9123456789)
    • Please Select Your Interest
    • Please specify

    • ajax-loader
    • A verifcation code has been sent to
      your mobile number

      Please enter the verification code below

    Newsletter Signup
    Follow us on
    This website uses cookie or similar technologies, to enhance your browsing experience and provide personalised recommendations. By continuing to use our website, you agree to our Privacy Policy and Cookie Policy. OK
    X

    Register to view Complete PDF