Solved Guess Papers for CBSE board exam 2018 are available here. These guess papers are available in the form of a combined package. This package is specially prepared for Maths and Science students who are going to appear for CBSE board exam 2018.
CBSE has recently released Class 12 date sheet. As per the date sheet, CBSE Class 12 board exams, 2018 will start from 5 March 2018 (English paper). Now, students don’t have much time for preparation. This is the time when students need to focus more on revision & practice rather than studying new topics.
Due to this reason, Jagranjosh.com has provided a complete package for the Class 12th students having Mathematics, Chemistry and Physics subjects. These papers are developed by subject experts after the brief analysis of previous 5 years’ papers.
After going through previous year papers, our subject experts learned that questions based on some important concepts are frequently asked in CBSE board exams, every year. These solved guess papers contain all such important concepts. These guess papers are also based on latest examination pattern. This package will be very helpful for the students preparing for CBSE board exam 2018.
Important highlights of the complete package:
More details about the 3 Guess Papers included in this package:
Class 12th Maths Guess Paper
There is no overall choice is present in the paper. However, internal choices are present in some questions.
Some questions from the solved Maths guess paper are given below:
Question: Find whether the binary operation * on the set N of natural number defined by x*y = 2xy is associative or not
(1*2) *3 = 22*3 = 212
1*(2*3) = 1*26 = 264
Therefore, (1*2)*3 ≠ 1*(2*3)
Question: If the radius of an iron sphere is measured as 9 cm with an error if 0.03 cm, then calculate the approximate error in calculating its volume.
Question: Find the coordinates of the point where the line through (3, – 4, – 5) and (2, –3, 1) crosses the plane passing through three points (2, 2, 1), (3, 0, 1) and (4, –1, 0).
Question: Arun can solve 90 % of the problems given in a book whereas Amit can solve 70%. Find the probability that at least one of them will solve the problem, selected at random from the book?
Question: The monthly incomes of Aryan and Babban are in the ratio 3:4 and their monthly expenditures are in the ratio 5:7. If each saves Rs 15,000 per month, find their monthly incomes using matrix method.
Suppose the monthly incomes of Aryan and Babban be 3x and 4x and their monthly expenditures are 5y and 7y respectively.
Since each saves Rs 15000 per month.
Monthly saving of Aryan: 3 x ‒ 5 y = 15,000 and monthly saving of Babban: 4 x ‒ 7 y = 15,000.
The above system of equations can be written in the matrix form as,
A X = B,
Therefore monthly income of Aryan = 3×30000= Rs.90,000.
Therefore monthly income of Babban = 4×30000= Rs.1,20,000.
Question: Prove that f (x) = | ln x | for x > 0 is not differentiable for all x > 0.
Question: A magazine seller has 500 subscribers and collects annual subscription charges of Rs.300 per subscriber. She proposes to increase the annual subscription charges and it is believed that for every increase of Re 1, one subscriber will discontinue. What increase will bring maximum income to her? Make appropriate assumptions in order to apply derivatives to reach the solution. Write one important role of magazines in our lives.
Increase in subscription charges = Rs x, Decrease in the number of subscriber = x.
Obviously, x is a whole number.
Income is given by y = (500 – x) (300 + x). Let us assume for the time being
y is maximum when x = 100, which is a whole number. Therefore, she must increase the subscription charges by Rs 100 to have maximum income.
Magazines contribute, a great deal, to the development of our knowledge. Through valuable and subtle critical and commentary articles on culture, social civilization, new life style we learn a lot of interesting things. Through reading magazines, our mind and point of view are consolidated and enriched.
Question: Find the general solution of 2x dy + (1 + tan y) (dx - dy) = 0.
Question: Find the point on the curve y = x3 ‒ 11x + 5 at which the equation of tangent is y = x ‒ 11.
Given, y = x3 ‒ 11x + 5 …(i)
Question: A company has two plants to manufacture scooters. Plants I manufactures 70% of the scooters and Plant II manufactures 30%. At Plant I, 80% if the scooters are rated as of standard quality and at Plant II, 90% of the scooters are rated as of standard quality. A scooter is chosen at random and is found to be of standard quality. Find the probability that it has come from plant II?
Suppose E1, E2 and A be the following events such that,
E1 = Plant I is chosen, E2 = Plant II is chosen and A = scooter is of standard quality
Question: Find the length of foot of perpendicular from the point (7, 14, 5) to the plane 2 x + 4 y – z = 2. Also, find the image of the point P in the line.
Suppose M be the foot of the perpendicular from P on the plane 2 x + 4 y – z = 2.
So, PM is the normal to the plane.
Its direction ratios are 2, 4, –1.
As PM passes through P (7, 14, 5). Therefore, its equation is
Question: A company manufactures gold rings & chains. The total number of rings and chains manufactured per day is exactly 24. It takes 1 hour to make a ring and 30 minutes to make a chain. The maximum number of hours available per day is 16. If the profit on a ring is Rs. 300 and that on a chain is Rs 190, find the number of rings and chains that should be manufactured per day, so as to earn the maximum profit. Make it as an L.P.P. and solve it graphically.
Total number of rings and chain manufactures per day = 24
Time taken in manufacturing ring = 1 hour
Time taken in manufacturing chain = 30 minutes or 1/2 hour
Number of hours available per day = 16
Maximum profit on ring = Rs. 300
Maximum profit on chain = Rs. 190
Let gold rings manufacture per day = x, chains manufactured per day = y
The above LPP can be stated mathematically as given below,
Maximize, Z = 300 x + 190 y
At (16, 0): Z = 4800 + 0 = 4800
At (8, 16): Z = 2400 + 3040 = 5400 [Maximum]
At (8, 16): Z = 0 + 4560 = 4560
So, Z is maximum at (8, 16). Therefore, 8 gold chain and 16 chains must be manufactured per day to earn the maximum profit.
Other questions and solutions are available in the eBook (link to access the file is given at the end)
Class 12th Physics Guess Paper:
In this Class 12th Physics ssolved Guess Paper, there are 5 sections (i.e., Section A, Section B, Section C, Section D and Section E)
Internal choices are present in short answer types questions and long answer type questions (According to latest CBSE Class 12 Physics Examination Pattern 2017 – 2018)
Some questions from the solved Physics guess paper are given below:
Question: Why is soft iron core preferred for making the core of a transformer?
As, the area of hysteresis loop for soft iron is very small so, energy dissipated per unit volume per cycle of magnetisation is small.
Question: Write two ways by which the range of transmission can be increased?
Range of transmission of T.V. signal can be increase
• By increasing the power of transmitting signal from TV station
• By increasing the heights of transmitting and receiving antenna
Question: What is meant by ‘half-life’ of a radioactive element? What percentage of a given mass of a radioactive substance will be left undecayed after four half lives?
The time interval in which the number of atoms of a radioactive element decays to one-half of its initial value is called half-life of the element.
If No is the initial quantity of radioactive element, then the quantity N of the element left after n half-live is given by: N = No(1/2)n.
The amount of substance left after 4 half lives can be given as:
N = No(1/2)4 = No/16 or 6.25% of initial value.
Arrange the following electromagnetic radiations in ascending order of their frequencies:
(ii) Radio waves
(iv) Gamma rays
Write two uses of any two of these.
Given electromagnetic radiations in ascending order of their frequencies are: Radio waves, microwaves, ultraviolet rays, X-rays and gamma
Uses of Electromagnetic Spectrum
(i) Gamma-rays are highly penetrating. They can penetrate thick iron blocks. Due to high energy, they are used to produce nuclear reactions. g-rays are produced in nuclear reactions. In medicine, they are used to destroy cancer cells.
(ii) X-rays are used in medical diagnostics to detect fractures in bones, tuberculosis of lungs,
presence of stone in gallbladder and kidney. They are used in engineering to check flaws in
bridges. In physics X-rays are used to study crystal structure.
Question: Amit is a resident of Tamil Nadu was all set to leave everything and shift to another place in view of the decision of Government to start nuclear thermal power plant at Tamil Nadu. His granddaughter Rashi, a science student was really upset on the ignorant decision of her grandfather. She could finally convince him not to shift, since adequate safety measures to avoid any nuclear mishap have already been taken by the Government before starting nuclear thermal power plants.
(i) What is the value displayed by Rashi in convincing her grandfather?
(ii) What is the principle behind working of nuclear reactor?
(iii) What are the main components of nuclear reactor?
(iv) Why is heavy water used as moderator?
(i) Rashi is attached to her native place.
(ii) A Nuclear reactor works on the principle of nuclear fission
(iii) Moderator, Cadmium rods
(iv) Heavy water (D2O) is used to slow down the speed of fast moving neutrons.
All the questions and solutions are available in the eBook (link to access the file is given at the end)
Class 12th Chemistry Guess Paper:
This solved Guess Paper has 5 sections (i.e., Section A, Section B, Section C, Section D and Section E)
Internal choices are present in short answer types questions and long answer type questions (Similar to latest CBSE Class 12 Chemistry Examination Pattern 2017 – 2018)
Some sample questions from the Chemistry Guess Paper are given below:
Question: NO2 group shows its effect only at ortho- and para- positions and not at meta- position. Explain
The presence of nitro group at ortho- and para-positions withdraws the electron density from the benzene ring and thus facilitates the attack of the nucleophile on haloarene. The carbanion thus formed is stabilised through resonance. The negative charge appeared at ortho- and para- positions with respect to the halogen substituent is stabilised by –NO2 group while in case of meta-nitrobenzene, none of the resonating structures bear the negative charge on carbon atom bearing the –NO2 group. So, the presence of nitro group at meta- position does not stabilise the negative charge and no effect on reactivity is observed by the presence of –NO2 group at meta position.
Question: Name the reagents which are used in the following conversions:
(i) Butan-2-one to butan-2-ol
(ii) Phenol to 2, 4, 6-tribromophenol
(iii) A primary alcohol to an aldehyde
(iii) Pyridinium chlorochromate (C2H5NH+CrO3Cl‒)
Question: Define the following terms:
(b) Tyndall Effect
(c) Lyophobic colloids
(a) Emulsion: It is a colloidal dispersion in which both the dispersed phase and the dispersion medium are liquids.
(b) Tyndall Effect: It is defined as the scattering of light by the colloidal particles present in colloidal solution.
(c) Autocatalysis: It is reaction in which one of the product acts as a catalyst then, it is called autocatalysis.
Question: Give reasons for the following
(i) Nickel does not form low spin octahedral complexes.
(ii) The p-complexes are known for the transition metals only.
(iii) Co2+ is easily oxidised to Co3+ in the presence of a strong ligand.
(i) Nickel does not form low spin octahedral complexes because ‘Ni’ has electronic configuration 3d8 4s2, in which two inner d-orbitals are not available which are required to form d2sp3hybridization.
(ii) The p-complexes are known for the transition metals only because they have ‘sandwich’ structure in which the metal ion lies between two planar C5H5 rings. The bonding involves overlap of p-electrons of the C5H5 rings with unfilled d-orbital of the metal. So, that all M–C bonds are identical for their stability.
(iii) Co2+ is easily oxidised to Co3+ in the presence of a strong ligand because in presence of strong ligand, the 3d electrons pair up leaving two orbitals empty to be involved in d2sp3 hybridisation.
All the questions and solutions are available in the eBook (link to access the file is given below)
DISCLAIMER: JPL and its affiliates shall have no liability for any views, thoughts and comments expressed on this article.