Engineering Services Examination 2011: Electrical Engineering Question Paper II

Solve the Electrical Engineering Question Paper of 2011 Engineering Services Examination.

1. The applied voltage of a certain transformer is increased by 75%, while the frequency of the applied voltage is reduced by 25%. The maximum core flux density will.

(a) Increase by seven times

(b) Increase by three times

(c) Reduce to one quarter

(d) Remain the same

3. A 4kVA, 400 V/200 V single phase transformer has resistance of 0.02 pu and reactance referred to high voltage side are:

(a) 0.2 Ω and 2.4 Ω

(b) 0.8 Ω and 2.4 Ω

(c) 0.08 Ω and 0.24 Ω

(d) 1 Ω and 3 Ω

4. The full-load copper-loss and iron-loss of a transformer are 6400 W and 500 W, respectively. The above copper loss and iron loss at half load will be:

(a) 3200 W and 250 W respectively

(b) 3200 W and 500 W respectively

(c) 1600 W and 125 W respectively

(d) 1600 W and 500 W respectively

Click on Electrical Engineering Question Paper to take test here and prepare better.

Engineering Services Examination 2011: Electrical Engineering Question Paper II